Luminaire Fittings.
Special Purpose Luminiares - Model TRITON T60
DescriptionWorkrooms, factories, warehouses etc. Two-piece die-cast aluminium body painted in powder colour contains all electrical parts. Protection IP 65 and high resisence against dust and spraying water ensures the EPDM rubber gasket diam. 8mm fastened between two parts of body by stainless-steel screws . Optical part is created by anodised and sealed aluminium reflector C (for narrow beam of rays) or D (for wide beam of rays) for IP 20. Model IP65 is provided with a cover made of tempered glass (CX/DX) with gasket fixed to the lower part of reflector. Connection to a power supply is ensured by three-core cable (part od luminaire). On request the connector can be supplied for model IP20. The version with additional halide lamp 250W, E27 (included) can be produced on request marking as TRIRON …/BO250. This additional lamp is operating whenever the luminaire is switched on and is disconnected as soon as a discharge lamp reaches 80% of average luminous flux. This version is not produced for model T60. BASIC VERSION: Equiped with parallel condenser and three-core cable (0,8m).
Parameters
| Nominal voltage | 230 V / 50 Hz |
| Lamps | discharge lighting |
| Protection | IP 65 |
| Protection class | I |
| Wiring method | sít TN-S three-wire into terminal block 2,5 mm2 |
| Packaging | Individually in cartones |
| Aplicability to normaly inflammable background direct mounting | YES |
| Surrounding temperature ta | -25°C ...+40°C
|
Types
[length] = [width] = [high] = [diameter] = mm; [weight] = kg
Links
