Luminaire Fittings.
Floodlight Luminaires - Model IZL
DescriptionSport centers, industrial areas, historical monuments, roadways, etc.. Luminaire basic body and rear cover are made of high-pressure die-cast aluminium in a gloss grey finish. Both parts are connected with stainless steel clips for access to the lamp without the need for tools. Reflector D is made of anodised matte aluminium. Side parts and antiglare shade of reflector C are also made of anodised matte aluminium, the rest parts are made of high polished aluminium. Tempered glass cover (hardness 6J) fixed to the body by six clips made of extruded aluminium with anodised protection. Stirrup made of a solid hot-dipped galvanised steel plate makes for floodlight fixation. In the side of stirrup is fixed die-cast polycarbonate electrical connection box incorporating an independent electronic igniter and 5th pole terminal board. Wiring, which leads from the electrical connection box to the lamp holder, consists of a 2,5 mm multi-wire flexible cable with silicone insulation reinforced with glass-fibre. There is possibility supply aluminium cover painted in grey finish for beam limitation of the three sides fixed to floodlight by few screws. Separate control box made of high-pressure die-cast aluminium must be supplied to floodlight. Control box incorporates ballast, capacitor, terminal board and two cable glands (on request).
Parameters
| Nominal voltage | 230 V / 50 Hz 400 V / 50 Hz |
| Lamps | discharge lighting |
| Protection | IP 65 |
| Protection class | I |
| Connection method | system TN-S triple-wire into terminal block 2,5 mm2 two-phase four-wire into terminal block 2,5 mm2 |
| Packing method | separately in carton |
| Usability for direct mounting on ordinarily inflammable supports | --- |
| Surrounding temperature ta | -25 ... +40°C |
Types
[length] = [width] = [high] = [diameter] = mm; [weight] = kg
Links
